800MM FANUC High Precison CNC Vertical Turning Lathe Brake Drum/disc Lathe
CK516 vertical CNC machine description
This machine base is whole piece designed by using thickwalls mixed with dense ribs structure, it has a high rigidity, strength and good shock absorption. The spindle unit design adopts the internationally mature chunky structure, supported by double row cylindrical roller bearings with bidirectional thrust angular contact ball bearings. Bearing lubricated by imported high-speed grease, when in the high-speed rotation getting very little heat, obtaining the best processing accuracy and lower operating temperature. The spindle driven by variable frequency motor through 4 gearshift gearbox and narrow V belt, which ensured the entire transmission system of high efficiency, low noise, low vibration. The guideway is linear guideway, which has the further of small friction coefficient, fast feed speed, big bearing capacity, low noise and long life. The machine equips with vertical 6-station electric turret, 8-station electric turret also can be chosen based on end users’ need, ∮530mm 3-jaw dead hole hydraulic chuck, chip conveyor, and centralized quantitative automatic lubrication system.
CNC system uses FANUC CNC system made in Japan, or GSK988T system made in China, which are high efficiency, high speed, high precision machining; and have easy operation, full-featured and high reliability further. The machine is fully enclosed and with emergency stop safety button, when the machine suddenly encountered an unexpected power failure or self-failure, due to the special design of the control circuit, it can be self-protection to ensure that the machine and personnel safety.
This CNC lathe was developed and designed accompanied by the latest development trend and adapting to market demand, it absorbed the advanced technology of similar machine at home and abroad. This machine is mainly used for processing the discs and short shaft parts, it can do the performance of turning inside and outside of the cylindrical surface, conical surface, circular surface, end face, slot, chamfer, thread and other processes, especially for more varieties, small batch of turns processing. Easy clamping, process adaptability, high processing efficiency, low scrap rate, easy programming, simple operation, good consistency of the finished product, and can reduce the technical requirements of the workers skilled, which made it widely used in Automotive, motorcycle industry and other industries for processing complex short shaft, disk parts.
|Swing over bed||mm||800|
|Max. turning height||mm||600|
|Max. turning Dia.||mm||600|
|Range of spindle||r/mm||45~1000|
|Max. of torque||nm||1200|
|Dia. front bearing||mm||160|
|Rapid of X-axis||m/mm||12|
|Rapid of Z-axis||m/mm||12|
|Travel of X-axis||mm||-50~500|
|Travel of Z-axis||mm||650|
|Type of tool post||V6|
|Shank external tool||mm||32x32|
|Servo motor of X||kw||2.5|
|Servo motor of Z||kw||2.5|
|Motor of coolingpump||kw||1.1|
- Previous: 1000MM Auto Vertical Alloy Wheel Turning CNC Lathe for Brake Drum /plate/disc
- Next: 630MM CNC Vertical Wheel Repair Turning Lathe