Swing Dia.1250MM-2000MM(16t) Large Swing Diameter Heavy Duty Horizontal Conventional Lathe Machine

Swing Dia.1250MM-2000MM(16t) Large Swing Diameter Heavy Duty Horizontal Conventional Lathe Machine

Product Details

Ordinary heavy duty 10T manual machine description

This series of machine tools are mainly used to undertake all kinds of turning work, it can turn all kinds of parts of the end, cylindrical, bore and metric thread, inch thread, modulus thread, diameter thread. Can be used on the turret to cut the taper alone, but also can be used on the knife with the vertical feed with the long taper motor. In addition can also bear the drilling, nesting, boring and other processes. The machine power, rigidity, and can use carbide cutting tools for thread cutting, to process a variety of ferrous metals and non-ferrous metals.

C61125 / 16T is a basic product, the maximum diameter of the bed diameter of 1250mm.

C61160 / 16T is the basic type of high product, the maximum diameter of the bed diameter of 1600mm

C61180 / 16T is the basic type of high product, the maximum diameter of the bed diameter of 1800mm.

C61200 / 16T is the basic type of high product, the maximum diameter of the bed diameter of 2000mm.


ITEMUNITC61125C61160C61180C61200
CAPACITIES
Swing over bedmm1250160018002000
Swing over carriagemm900125014501650
Max.length of workpiecemm3000 4000 5000 6000 8000 10000 12000
Max.turning lengthmm2800 3800 4800 5800 7800 9800 11800
Pan of guidewaymm1100
SPINDLE
Spindle nosemmA2-15
Spindle boremm100
Taper hole of spindle
Metric140
Range of spindle speedsr/minForward:3.15~315; Reverse:3.5~291
No.of spindle speedsr/minForward:21 ;  Reverse:12 
FEED
No.of Longitudinal and cross
56/56
Feed per revolutionmmLongitudinal:0.1~12;Transverse:0.05~6;Up turret:0.025~3
No. and range of metric thread
44;1~120mm
No. and range of inch thread
31;28~1/4″
No. and range of module thread
45;0.5~60mm
No. and range of dia. thread
38;1/2~56DP
TURRET
Distance of centerline and tool resting planemm53
Tool post swing range°±90°
Max.travel of cross slidemm740   850   900   900
Max.travel of top slidemm360
Section of tool shankmm50(380x380)
Travel of tool post (per turn of dials)mm0.05(0.002″)
TAILSTOCK
Dia. of tailstockmm260
Travel of tailstock quillmm300(12″)
Taper hole of tailstock quill
Metric80
OTHERS
Main motor powerkw30
Lengthmm6120 7120 8120 9120 11120 13120 15120
Widthmm2058 2130 2330 2430
Heightmm2200 2380 2480 2580
Max.weight of workpiecet16

Related Products

Inquiry