500MM Gang Type Swiss Type Slant Bed CNC Lathe

500MM Gang Type Swiss Type Slant Bed CNC Lathe

Product Details

AP20 turret slope bed CNC lathe description

This machine is electromechanical integrated structure, gang-type turret design, has no tailstock, and suitable for processing of various parts. The machine bed is box-shaped structure casting with the material of tough cast iron (HT300) by one-time molding casting technology, and processed by the imported high-precision pentahedral machining center using one-time clamping processing. Spindle structure is front fixed and rear floating support, and by using large diameter P4 grade high precision cylindrical roller bearings and high-speed bevel contact ball bearings achieves radial and axial withstand and synthetic load. Spindle bore is 56mm, spindle motor uses variable frequency motor. Ball screw and spindle bearings both are used NSK bearing made in Japan. Two axes are driven directly by the servo motor. Chuck is dead hole hydraulic chuck. This machine has automatical workpiece collecting device, it can work continuously. The CNC control system adopts the internationally acclaimed FANUC 0i TF control system (also can choose the other system according to the user's request). This machine is fully chip guard, and with emergency stop safety button, when the machine suddenly encounters an unexpected power failure or self-failure, due to the special design of the control circuit, it can be self-protection to ensure that the machine and personnel safety.

This machine is suitable for the processing of various small shaft, sleeve and disk parts, such as turning the inner and outer cylindrical surface, conical surface, circular surface, end face, slotted, chamfering, drilling, reaming and thread. Easy assembly, process adaptability, high processing efficiency, low scrap rate, good consistency of the finished product, reducing the technical requirements of the workers skilled, easy programming and simple operation makes it is chosen as the ideal small and medium-sized mechanical processing equipment.


ITEMUNITAP20
CAPACITIES
Swing over bedmm500
Swing over carriagemm200
Max.length of workpiecemm280
SPINDLE
Spindle nose
A2-5
Chuckinch6
Main powerkw7.5
Spindle speedr/min5000
Spindle boremm56
Bar capacitymm42
FEED
X-axis servo motorkw1.88
X-axis motor torquenm7.5
X-axis Max. travelmm400
Z-axis servo motorkw1.88
Z-axis motor torquenm7.5
Z-axis Max. travelmm285
X/Z-axis rapidm/min24/24
Connection of X/Z
Direct connection
TURRET
No. of station
4~8
Size of turretmm20x20
Boring tool sizemm
Power-driven tool
1/2/3 head
OTHERS
Accuracy
IT6
RoughnessμmRa0.8
Positioning accuracymmX:0.016           Z:0.020
Repeat accuracymmX:0.007           Z:0.010
OVERALL
Weightkg2200
Lengthmm1870
Widthmm1500
Hightmm1600
CNC system
GSK988T


Related Products

Inquiry